12
BASIC FUNCTIONS
ENGLISH
Airing your room
(Air Circulation operation)
This mode only circulates the indoor air
without changing the room temperature. The
cooling lamp lights up in air circulation mode.
1 Press | to turn on the power.
2 Press / to select the air circulation oper-
ation.
- E is displayed on the display screen.
3 Press g to adjust the fan speed.
Adjusting the fan speed
1 Press g repeatedly to adjust the fan
speed.
- Select
5
if you want natural air.
The fan speed adjusts automatically.
Adjusting the air flow direc-
tion
1 To adjust the direction of the air flow verti-
cally, press D repeatedly and select the
desired direction.
- Select
I to adjust the direction of the
air flow automatically.
2 To adjust the direction of the air flow hori-
zontally, press E repeatedly and select
the desired direction.
- Select
J to adjust the direction of the
air flow automatically.
Setting the timer
You can use the timer function to save ener-
gy and to use the air conditioner more effi-
ciently.
Setting the current time
1 Press p and hold it for longer than 3 sec-
onds.
- The AM/PM icon flickers at the bottom of
the display screen.
NOTE
!
• Adjusting the air flow direction horizon-
tally may not be supported, depending
on the model.
• Adjusting the air deflector arbitrarily may
cause product failure.
• If you restart the air conditioner, it starts
to operate with the previously set direc-
tion of air flow, so the air deflector may
not match the icon displayed on the
remote control. When this occurs, press
D or E to adjust the direction of
the air flow again.
Remark Speed
High
Medium
Low
Natural Wind
To Next Page
Loading...
Need help?
General
