9
Safety Instructions
Due to our policy of continuous product innovation, some specications may change without notication.
©
LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Control Panel Display Screen Description
Timer Buttons (On/Off): Sets the clock timer to enable automatic start
and stop times for air conditioner activity.
Pressing the enables the user to set the actual time as shown on the
display screen.
N/A
Set/Clear Button: Either sets (commits) a function or clears (cancels) a
function.
When pressing and holding for 3 seconds or longer, allows the user to set
current time by using the buttons.
N/A
Up/Down (Directional) Buttons: Used in conjunction with other
primary mode and operation buttons. Once in desired mode, user can press
the Up and Down button to move forward or backward in selections. For
example these buttons can be used to set timer clock settings or brightness of
the indoor unit display.
N/A
Reset Button: Pin reset indention (shown under the “UP” button) allows
the user to reset the air conditioner to factory defaults by inserting a pen tip or
small screw driver into hole.
Table 2: Remote Controller Operation (Continued)
UNIT OPERATION
Remote Controller
Basic Remote Controller Operation - Continued
To Next Page
Loading...
