2. Description of Function
2-1-1. Function of Temperature Selection
* The temperature can vary ±5°F (±3°C) depending on the load condition.
❉ Whenever pressing button, setting is repeated in the order of COLD ➝ COLDER ➝ COLDEST ➝ COOL ➝ COLDER.
• The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target
temperature, not actual temperature within refrigerator.
• Refrigeration function is weak in the initial time. Please adjust temperature as above after using refrigerator for minimum
2~3 days.
• Freezer Notch is fixed COLDER unconcerned with display Notch during Icemaking Control Mode and Icemaker Stop
switch is selected with ON.
2-1-2. Outside temperature display function
1. The ambient temperature sensor is located under the upper right hinge cover. This sensor reads the temperature of the
room and displays it in the upper right corner of the display.
2. The ambient temperature is displayed between 16 °F and 120 °F. Outside of that range, the display will show Er.
3. Since the ambient temperature sensor is located at the hinge, its reading may differ from other thermometers in the room.
MICOM FUNCTION
- 13 -
Division Power Initially On 1st Press 2st Press 3th Press 4th Press
Temperature
Control
COLD COLDER COLDEST COOL COOLER
Freezer Control
-2 °F -5 °F -8 °F 7 °F 1 °F
Refrigeration
37 °F 34 °F 32 °F 46 °F 41 °F
Control
To Next Page
Loading...
Need help?
General
