2-16. Failure Diagnosis Function
1. Failure diagnosis facilitates service when a failure code shows during product operation.
2. When a failure is detected, the buttons are deactivated.
3. If a failure code is released, the MICOM resets and normal operation continues.
4. The failure code is displayed on the FRZ TEMP display. All display graphics that are not part of the failure code are
turned off
(1) GR-L277SV(S)VA (LSC27950SW, LSC27950SB, LSC27950ST)
MICOM FUNCTION
- 21 -
To Next Page
Loading...
