Door switch
Oven lamp
Broil or bake igniter
1. Refer to page 3-8 for the servicing procedure
2. Measure the resistance after cooling down
(Multiple meter scale: R x 1)
Components Test procedures Results
Door open Door closed
Continuity Infinite
1. Measure the resistance after cooling down
(Multiple meter scale: R x1)
Normal: Approximately
5 Ω ± 10%
If not replace
1. Refer to page 3-9~3-10 for servicing procedure.
2. Measure the resistance after cooling down.
(Multiple meter scale : R x 1)
Normal: 45 Ω
~
400 Ω
(Room Temperature
Resistance)
If not replace
4-3
COMPONENT TEST
To Next Page
Loading...
Need help?
General
