-12-
PLANNING THE INSTALLATION
ELECTRICAL
For personal safety, remove house fuse or open
circuit breaker before beginning installation. Do not
use extension cord or adapter plug with this
appliance.
Follow national electrical codes or prevailing
local codes and ordinances.
Electrical Supply:
This appliance requires a 120V 60Hz electrical
supply, and connected to an individual, properly
grounded branch circuit, protected by a 15 or 20
ampere circuit breaker or time delay fuse. Wiring
must be 2 wire w/ ground. Please also refer Electrical
Diagram labeled on product.
Cable Lock:
A cable locking connector (not supplied) might also
be required by local codes. Check with local
requirements and codes, purchase and install
appropriate connector if necessary.
Cable Lock
WARNING
All Electrical work must by performed by
qualified electrician or person with similar
technical know how and background.
WARNING
Electrical wiring must be done by a qualified
person(s) in accordance with all applicable
codes and standards. This range hood must
be properly grounded. Turn off electrical
power at service entrance before wiring.
To Next Page
Loading...
Need help?
General
