What to do if my LG Electric range oven will not work?
If your LG Electric range oven isn't working, start by ensuring the range is fully plugged into a properly grounded electrical outlet. Next, check your home's fuse box or circuit breaker to see if a fuse has blown or a breaker has tripped; replace the fuse or reset the breaker if needed. Finally, make sure the oven controls are properly set according to the 'Using the oven' section.
How to level an LG Electric range?
To level your LG Electric range, first place an oven rack in the center of the oven. Then, put a level on the rack and adjust the leveling legs at the base of the range until the rack is level. Ensure the floor is level, strong, and stable enough to support the range. If the floor is sagging or sloping, contact a carpenter. Also, check that the kitchen cabinets are square and provide sufficient clearance for the range.
How to level my LG LST5651SB Ranges?
If your LG Ranges is not level, start by placing an oven rack in the center of the oven and put a level on the rack. Adjust the leveling legs at the base of the range until the rack is level. Ensure the floor is level, strong, and stable enough to support the range. If the floor is sagging or sloping, contact a carpenter. Also, check that the kitchen cabinets are square and provide sufficient clearance for the range.
What to do if my LG Electric range oven control displays 'PF' message?
The 'PF' message on your LG Electric range typically indicates a power interruption. First, ensure the cord is correctly plugged into the outlet and check the circuit breakers. To clear the message, press the CLEAR/OFF control pad and reset the clock to the correct time. Alternatively, try pressing the ON/OFF pad. If the issue persists and the oven is cool, it may be too hot and needs to cool down. If the issue persists, contact your appliance service for assistance or call your local electric company to check for a power outage.
Why is my LG Electric range oven smoking excessively during broiling?
Excessive smoke during broiling in your LG Electric range can occur for several reasons. Ensure the meat is not too close to the element by repositioning the rack and preheating the broil element. Remove excess fat from the meat and cut remaining fatty edges. Make sure the insert on the broiler pan is correctly placed with ribs up and slots down. Regular cleaning is necessary to prevent grease buildup. Please refer to the 'using the oven' section for information about oven controls, rack position, and appropriate cookware.
Why are the oven racks in my LG Electric range difficult to slide?
In a new LG Electric range, it's normal for the oven racks to be difficult to slide at first; this will improve over time. If you have cleaned shiny, silver-colored racks in a self-clean cycle, apply a small amount of vegetable oil to a paper towel and wipe the edges of the oven racks. Do not use lubricant sprays.
What to do if my LG Ranges oven control displays a 'PF' message?
The PF message on your LG Ranges display indicates that there has been a power interruption. To clear it, press the CLEAR/OFF control pad and reset the clock to the correct time.
Why my LG Ranges oven will not work?
If your LG Ranges oven will not work, ensure the electrical plug is fully inserted into a properly grounded outlet. Also, check your home's fuse box or circuit breaker and replace the fuse or reset the breaker if necessary. Refer to the 'Using the oven' section for instructions on proper oven control settings.
Why does my LG LST5651SB oven light not work, and why is there excessive smoke when broiling?
If the oven light in your LG Ranges does not work or the oven smokes excessively during broiling, consult the 'Changing Oven Light' section in the manual for instructions on how to replace or tighten the bulb. Ensure the meat is not too close to the element by repositioning the rack. Preheat the broil element for searing. Remove excess fat from the meat, and cut remaining fatty edges to prevent curling, without cutting into the lean. Always place the grid on the broiler pan with ribs up and slots down to allow grease to drip into the pan. Clean the oven regularly to prevent grease buildup.
Why won't the surface units on my LG Ranges maintain a rolling boil?
If the surface units on your LG Ranges will not maintain a rolling boil, ensure you are using flat pans that match the diameter of the surface unit selected.
Essential guidelines to prevent fire, shock, injury, or damage during oven use.
Safety precautions for oven operation, self-cleaning, and specific hazards like birds.
Critical warnings for door safety, power, children, and hot surfaces.
Cautions for timed bake, oven fires, children, foil use, and cleaning.
Step-by-step guide to turn on/off and adjust single/dual surface units.
Detailed explanation of each control pad and the main display functions.
Guide to adjusting the oven's temperature accuracy.
Instructions for setting the bake temperature and preheating.
Programming the oven to bake for a set duration and shut off automatically.
Setting the oven to start and end baking automatically at future times.
Steps to prepare for self-cleaning and safety warnings.
Common issues and solutions before calling for service.
Troubleshooting for oven not working, appliance operation, PF messages, and broiling problems.
Troubleshooting for baking, temperature, cooktop scratches, and metal marks.
Troubleshooting for self-clean problems, steam, odors, and rack sliding.
General| Number of Burners | 5 |
|---|---|
| Convection Oven | Yes |
| Self-Cleaning | Yes |
| Type | Freestanding |
| Color | Stainless Steel |
| Burners | 5 |
| Convection | Yes |
| Width | 30 inches |
To Next Page
