Tape Playback
12
Basic Playback
11
Press FUNCTION repeatedly to appear TAPE
indicator.
22
Open cassette deck by pushing STOP/EJECT
(
/
) button.
33
Insert a cassette with the tape side to the
bottom and then close deck.
44
Press PLAY ( ).
To Stop Play
Press STOP/EJECT (
/
) during playback.
To Pause Play
Press PAUSE ( ) during playback.
Press this button again it to resume play.
To Play Fast Rewind or Fast Forward
After pressing REWIND/FAST FORWARD (
/
)
on the front panel during playback or stopping.
AUTO STOP DECK
After auto stop deck plays only front side, the unit stops
automatically.
Basic Setting
11
Select the function (MP3/CD, TUNER/BAND or
AUX) you want to record.
22
Open the cassette deck and insert a blank
cassette into the cassette compartment.
Recording from Radio, CD or Auxiliary
source
11
Press FUNCTION button to select desired
recording source, and then press RECORD
() button.
The recording begins.
For your reference
When you press RECORD ( ) button, PLAY ( )
button is pressed automatically.
22
To pause recording
Press PAUSE ( ) button during recording.
• Press PAUSE ( ) button again to resume
recording.
33
To stop recording
Press STOP/EJECT ( / ).
CD to Tape Synchronized Recording
The CD synchro recording function dubs a complete CD
and programmed titles automatically into a cassette.
11
When you select CD function, press RECORD
() button.
“REC” appears and “ ” displays in the
display window.
22
The synchronized recording is started
automatically after about 8 seconds.
ote
• If you wish to record from the desired track, select the
desired track with CD SKIP/SEARCH (
/
) before commencing CD synchro
recording.
• The function change is not possible during recording.
Wind the tape to the point recording starts. (Use only normal tapes.)
Recording
To Next Page
Loading...
Need help?
General
