10
Presetting the Radio Stations
You can preset 50 stations for FM and AM.
1. Press TUNER/BAND to select the FM or AM .
2. Press TUNING (
+/-
) until the frequency
indication starts to change,then release.
Scanning stops when the unit tunes into
a station.
3. Press PROGRAM/MEMO.
A preset number will flash in the display window.
4. Press PRESET (
+/-)
(or PRESET( )on the
remote control) to select the preset number you
want.
5. Press PROGRAM/MEMO.
The station is stored.
6. Repeat steps 3 to 5 to store other stations.
otes
•Tuning in automatically
Press TUNING (
+/-
) for more than 0.5 seconds.
•Tuning in manually
Press TUNING (
+/-
) briefly and repeatedly.
To clear all the memorized stations
Press and hold PROGRAM/MEMO. on the front
panel for two seconds, “CLEAR” appears in the
display window and then press CLEAR.
For your reference
If all stations have already been entered, FULL mes-
sage will appear in the display window for a moment
and then a preset number will flash. To change the
preset number, follow steps 3-5.
To recall presets
Press and hold PRESET (+/-) (or PRESET
() on the remote control) until the desired
preset number appears .
Listening to the radio
1.Press TUNER/BAND to select the FM or AM you
want in the display window.
The last received station will be displayed.
2.Press PRESET (
+/-
) (or PRESET ( ) on
the remote control) repeatedly to select the pre-
set station you want.
3.
Adjust the volume by pressing VOLUME
CON-
TROL KNOB on the front panel or VOLUME
() on the remote control repeatedly.
To listen to non-preset radio stations
• Use manual or automatic tuning in
step 2(Presetting the Radio Stations).
• For automatic tuning, press and hold TUNING
(
+/-
) on the front panel.
To turn off the radio
Press POWER to turn the unit off or select another
function mode (CD, TAPE ,USB or AUX).
For your reference
• If an FM program is noisy
Press MODE/RIF so that “STEREO” disappears
in the display window. There will be no stereo
effect, but the reception will improve. Press
MODE/RIF again to restore the stereo effect.
• To improve reception reposition the supplied
antennas.
ote
When recording the MW(AM) broadcast, beat nois-
es may occur. If it does, press MODE/RIF once to
reduce the noises
.
To Next Page
Loading...
Need help?
General
