LG M2901S - Page 41

Controlling the Multiple Product
RS-232C
A10
Transmission / Receiving Protocol
23. DPM Select(Command : f j)
► Set the DPM (Display Power Management) function.
Transmission Acknowledgement
[Data] 00 : Off 01 : On
27. H-Position (Command : f q)
► To set the Horizontal position
Transmission Acknowledgement
* The data range is from 00 to 64(in Hex)
24. Reset(Command : f k)
► Execute the Picture, Screen and Factory Reset functions.
Transmission Acknowledgement
[Data]
0 : Picture Reset
1 : Screen Reset
2 : Factory Reset
25. Power saving(Command : f I)
► To set the Power saving mode.
Transmission Acknowledgement
[Data]
0 : Off
1: (static level 1)
2: (static level 2)
3: (static level 3)
26. Power Indicator (Command : f o)
► To set the LED for Power Indicator.
Transmission Acknowledgement
[Data] 0 : Off 1 : On
[f][j][][Set ID][][Data][Cr]
[f][q][][Set ID][][Data][Cr]
[f][k][][Set ID][][Data][Cr]
[f][i][][Set ID][][Data][Cr]
[f][o][][Set ID][][Data][Cr]
[j][][Set ID][][OK/NG][Data][x]
[q][][Set ID][][OK/NG][Data][x]
[k][][Set ID][][OK/NG][Data][x]
[i][][Set ID][][OK/NG][Data][x]
[o][][Set ID][][OK/NG][Data][x]