This button is for the automatic adjustment of the screen position, clock and phase.
This function is suitable for analogue signal input only.
Auto-config.
(RGB PC
input only)
To minimize any vertical bars or stripes visible on the screen
background. The horizontal screen size will also change. This function
is suitable for analogue signal input only
Clock
To adjust the focus of the display. This item allows you to remove any
horizontal noise and clear or sharpen the image of characters. This
function is suitable for analogue signal input only.
Phase
H-Position
Moving the screen position vertically.
Manual-
config.
XGA Mode
(RGB-PC
only).
V-Position
Moving the screen position horizontally.
If the picture isn't clear after auto adjustment and especially that characters are still
trembling, adjust the picture phase manually.
* It's not available to use Phase, Clock function in RGB DTV, Component, HDMI/DVI DTV.)
For more improved or better picture quality, select the same mode corresponding to
computer resolution.
To Next Page
Loading...
Need help?
Panel Specifications
