18
Connecting to External Devices
When connecting with an BNC cable.
• Select AV.
Connect the video cable as shown in the below figure and then connect the
power cord. (See page 12).
When connecting with a BNC cable.
• Connect the input terminal with a proper color match.
BNC Cable
(not included)
Product
VCR/DVD Receiver
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the INPUT button on the back of the product.
Audio Cable
(not included)
Video Input
INPUT → → OK
1
2
INPUT →◄ ► → AUTO/SET
Input List
AV Component RGB HDMI/DVI SuperSign
To Next Page
Loading...
Need help?
General
