11
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the back of the product.
How to connect to two computers.
Connect the signal cables (HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
Directly connect to a grounded power outlet on the wall or a power bar with a ground wire.
Note
Turn on power by pressing the power button on the product.
Turn on the PC.
When connecting with a D-Sub signal input cable.
RGB : 15-pin D-Sub analog signal.
When connecting with a HDMI to DVI signal input cable.
HDMI/DVI : HDMI to DVI Digital signal.
Connecting to External Devices
Power button
2.
1.
B.
A.
4
5
AVAV
Input List
AVAV
Input List
To Next Page
Loading...
Need help?
General
