22
User Menus
Adjusting Screen Color
Aspect Ratio
To select the image size of the screen.
16:9:
Widescreen mode.
Just Scan:
Displays the full signal data without cropping any of the image.
(*This menu is activated only in 720p,1080p,1080i (HDMI/DVI-DTV, Component mode)
Original:
The aspect ratio is not adjusted from the original signal and is set by the program being
watched.
4:3:
Selects a 4:3 aspect ratio image.
1:1: The aspect ratio is not adjusted from the original. Used in PC mode (only HDMI/ DVI PC, RGB PC).
14:9:
14:9 programs are viewed normally in 14:9 with black bars added to the top and bottom.
4:3 programs are magnified on the top/bottom and left/right sides.
Zoom:
4:3 programs are magnified until they fill the 16:9 screen. The top and bottom will be cut off.
Cinena Zoom 1:
Choose Cinema Zoom when you wish the picture to be altered, both horizontally
extended and vertically cropped. This is a good compromise between signal
alteration and screen coverage.
Full Wide:
When the set receives a wide screen signal, it causes you to adjust the picture
horizontally or vertically, in linear proportion, to fill the entire screen.
To Next Page
Loading...
