EasyManua.ls Logo

LG M3704C

LG M3704C
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
26
User Menus
Move
OK
PICTURE
• Contrast 90
• Brightness 50
• Sharpness 70
• Color 60
• Tint 0
Advanced Control
• Picture Reset
Screen
• Advanced Control
High
Medium
High
Medium
High
Off
Color Temperature
Dynamic Contrast
Dynamic Color
Noise Reduction
Gamma
Black Level
Film Mode
Close
Medium ►
Adjusting Screen Color
Advanced Control
Color Temperature: Color Settings
Cool: Slightly purple temperature.
Medium: Slightly blue temperature.
Warm: Slightly red temperature.
Dynamic Contrast: Optimizes the contrast automatically according to the brightness of the
reflection. (This function can be used only under AV, Component and HDMI/
DVI(DTV).)
Dynamic Color: Adjusts the color of the reflection automatically to reproduce natural colors as
closely as possible. (This function can be used only under AV, Component and
HDMI/DVI(DTV).)
Noise Reduction: Removes noise up to the point where it does not damage the original picture.
(This function can be used only under AV, Component and HDMI/DVI(DTV).)
Gamma: Sets your own gamma value.
On the set, high gamma values display whitish images and low gamma
values display high contrast images.
Black Level: Adjusts the contrast and the brightness using the black level of the screen (function
works in the following modes: AV, Component, HDMI-DTV).
Low: The reflection of the screen gets darker.
High: The reflection of the screen gets brighter.
Film Mode: When you watch a movie, this function adjusts the set to the best picture appearance
(function works in the following modes: AV, Component 480i/576i/1080i, HDMI/DTV
480i/576i/1080i).
White Balance: Adjusts the overall color of the screen to your preferences (function works in the
following modes - Expert 1, Expert 2 Picture mode).
Color Management System: This is an expert tool used to make adjustments by using test
patterns. This does not affect other colors but can be used to
selectively adjust the 6 color areas (red/green/blue/cyan/magenta/
yellow). Color differences may not be distinct even when you
make general adjustments for video (function works in the
following modes: Expert 1, Expert 2 Picture mode).

Related product manuals