LG M3704C

Controlling Multiple Set
RS-232C
A29
Transmission / Receiving Protocol
47. Serial no.Check (Command : f y)
► To read the serial numbers
Transmission
Data FF (to read the serial numbers)
Acknowledgement
* The data format is ASCII Code.
[y][][Set ID][][OK/NG][Data1] ~ [Data13] [x]
[f][y][][Set ID][][Data][Cr]
48. S/W Version (Command : f z)
► Check the software version.
Transmission
Data FFH : Read
Acknowledgement
[f][z][][Set ID][][Data][Cr]
[z][][Set ID][][OK/NG][Data][x]