What to do if the LG Home Cinema speakers remote control does not work?
If the LG Home Cinema speakers remote control isn't working, make sure to point it directly at the unit's remote sensor and stay within 23 ft (7 m). Remove any obstacles blocking the path between the remote and the unit. If it still fails, replace the batteries with new ones.
Why is there no sound from my LG MBD102-A0U Home Theater System, or the sound is very low?
If you're experiencing no sound or very low sound from your LG Home Theater System, check that the equipment connected with the audio cable is set to receive the DVD signal output. Also, verify that the power of the equipment connected with the audio cable is turned on.
Why does my LG Home Theater System remote control not work?
If the remote control for your LG Home Theater System isn't working, try these steps: 1. Make sure you're pointing the remote directly at the remote sensor on the unit. 2. Ensure you're within 23 ft (7 m) of the unit. 3. Check for any obstacles between the remote and the unit and remove them. 4. Replace the batteries in the remote with new ones.
How to stop loud hum or noise from LG MBD102-A0U?
If you hear a loud hum or noise from your LG Home Theater System, first, try cleaning the disc. Second, ensure the speakers and components are securely connected. Finally, move the TV away from the audio components.
How to eliminate loud hum or noise from my LG MBD102-A0U?
If you hear a loud hum or noise from your LG Home Theater System, first, clean the disc. Then, ensure the speakers and components are securely connected. Finally, move the TV away from the audio components.
How to brighten the front panel display on my LG MBD102-A0U?
If the front panel display on your LG Home Theater System is too dim, press the DIMMER button.
How to brighten the display on LG Home Cinema speakers?
If the front panel display on your LG Home Cinema speakers is too dim, press the DIMMER button.
Why is there no picture from my LG Home Cinema speakers?
If you're not getting a picture on your TV from the LG Home Cinema speakers, first, ensure that your TV is set to the correct video input mode to receive the DVD signal. Check that the video cable is securely connected to both the unit and the TV. Also, verify that the TV is powered on.
Why is nothing displayed on the front panel of my LG Home Theater System?
If nothing is displayed on the front panel of your LG Home Theater System, the unit may have entered power save mode. To cancel power save mode, refer to the manual.
Why won't my LG Home Theater System tune into radio stations?
If your LG Home Theater System is not tuning into radio stations, make sure the antenna is securely connected and properly positioned. If the signal strength is weak, try tuning in the station manually.
General| Brand | LG |
|---|---|
| Model | MBD102-A0U |
| Bluetooth | Yes |
| USB Port | Yes |
| Optical Input | Yes |
| Playback Media | DVD, USB |
| Connectivity | Bluetooth |
To Next Page
