EasyManuals Logo

LG MCD104 User Manual

LG MCD104
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
11
Using your player as an alarm clock
1 Turn the power on.
2 Press and hold TIMER. Each function, EX) TUNER, CD.... flashes.
3 Press SET when the function you want to be woken by is showing.
4 Choose one of them by pressing SET.
5 “ON TIME” will be displayed. Then you can set the time you want the alarm
to go on. Press .bb/BB > to change the hours and minutes and
SET to save.
6 “OFF TIME” will be displayed. Then, you can set the time you want the
function to stop. Press .bb/BB > to change the hours and minutes
and press SET to save.
7 You will be shown the volume (VOL) you want to be woken by.
Use .bb/BB > to change the volume and SET to save.
The clock icon “ ” shows that the alarm is set.
8 Press TIMER button 2times. You can check the setting status.
Notes:
• If you set the clock time, you can check the time by pressing CLOCK even
when the player is turned off.
• If you set the clock time and alarm, you can check the alarm icon “ ” by
pressing CLOCK even when the player is turned off.
Setting the asleep time
1 Press SLEEP repeatedly to select delay time between 10 and 180 minutes,
after the unit will be turned off.
2 To check the remaining time, press SLEEP.
3 Press SLEEP once while “SLEEP 10” is displayed, to deactivate sleep
function.
DIMMER
Press SLEEP once. The LED (Light-emitting diode) of front panel is turned off
and the display window will be darken by half. To cancel it, press SLEEP
repeatedly until dim off.
Setting the Clock
1. Turn the power on
2. Press for at least 2 seconds
3. Choose from either AM 12:00 (for an am and pm
display) or 0:00 (for a 24 hour display).
4. Confirm your selection
5. Select the hours
6. Press
7. Select the minutes
8. Press
The clock setting is finished.
ON UNIT
11
/
]]
CLOCK
. bb/BB >
SET
.bb/BB >
SET
.bb/BB >
SET
Recording to TAPE
You can record a various sound source to TAPE.
1. Open the tape deck.
2. Insert a blank tape and close the
door.
3. Select a mode in which you want to
record.
4. Play back a sound source first.
5. Press
Recording starts.
6. To stop recording, press
xx ZZ
-
(CD,TUNER, ...)
BB
zzBB
xx ZZ
-
-
FUNCTION
-
-
-
ON UNIT ON REMOTE
MCD104-A0U-ACHLLLK_ENG 12/4/09 11:17 AM Page 11

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG MCD104 and is the answer not in the manual?

LG MCD104 Specifications

General IconGeneral
BrandLG
ModelMCD104
CategoryCD Player
LanguageEnglish

Related product manuals