12
Specifications
General
Power supply Refer to main label.
(Mexico only : 120 V ~ 60 Hz)
Power consumption MCD104: 30 W MCD204: 50 W
Net Weight MCD104: 5 kg MCD204: 5.27 kg
External dimensions (WxHxD)
272 x 338 x 358 mm
Operating temperature 5
o
C to 35
o
C
Operating humidity 5% to 85 %
Tuner
FM Tuning Range 87.5 - 108.0MHz or
87.50 - 108.00 MHz
AM Tuning Range (optional)
522 -1620 kHz or 520 -1710 kHz
Amplifier
Output Power MCD104: 100W MCD204: 200 W
T.H.D 0.50 %
Frequency Response 45 Hz - 20 KHz
Signal-to-noise ratio 70 dB
CD
Frequency response 45 Hz - 20 KHz
Signal-to-noise ratio 70 dB
Dynamic range 70 dB
Cassette
F.F/REW Time 120 sec (C-60)
Frequency Response 250 - 8000 Hz
Signal to Noise Ratio 40 dB
Channel Separation 35 dB (P/B)/ 45 dB (R/P)
Erase Ratio 50 dB (MTT-5511)
Speakers (MCS104F)
Type 2 Way 2 Speaker
Impedance 4 Ω
Input Power 50 W
Max. Input Power 100 W
Net Dimensions (WxHxD) 220 x 338 x 228 mm
Net Weight (1EA) 2.28kg
Speakers (MCS204F)
Type 2 Way 2 Speaker
Impedance 4 Ω
Input Power 100 W
Max. Input Power 200 W
Net Dimensions (WxHxD) 220 x 338 x 243 mm
Net Weight (1EA) 3.06 kg
USB
Version 1.1
BUS power supply DC 5V 500mA
Troubleshooting
Symptom Cause Correction
General
No power.
No sound.
The power cord is not plugged in.
Check whether electricity failed.
Check whether you select right function.
Plug in the power cord.
Check the condition by operating other
electronic devices.
Press FUNCTION and check the select-
ed function.
CD
The unit does not
start playback.
An unplayable disc is inserted.
The disc is dirty.
Insert a playable disc.
Clean the disc.
RADIO
Radio stations
cannot be tuned in.
The antenna is positioned or connected
poorly.
Connect the antenna securely.
Remote control
The remote control
does not work
properly.
The remote control is too far from the
unit.
There is an obstacle in the path of the
remote control and the unit.
The battery in the remote control is
exhausted.
Operate the remote control within about
23 ft (7 m).
Remove the obstacle.
Replace the battery with new one.
TAPE
Unable to record. Record protect tabs are removed. Cover holes on back edge of tape with
tap.
Designs and specifications are
subject to change without
notice.
To Previous Page
Loading...
Need help?
General
