7
Listening to CDs
Listening to CDs - More you can do
Pausing or restarting a CD
1 Press SET/CD
[]
on the unit or
BB
/
[]
on the remote control
during playback.
2 Press this button again to resume play.
Searching for a section within a track
Hold .bb / BB> on the unit or ./> on the remote control
during
playback
and release it at the point you want to listen to.
Skipping to another track (files)
Press .bb / BB> on the unit or ./> on the remote control in stop
status.
Listening to your tracks (files) repeatedly or randomly
1 Press REPEAT/RANDOM repeatedly. The current (tracks) file will be played
back repeatedly or randomly.
2 To return to normal playback, press REPEAT/RANDOM repeatedly to select
[Off].
Program list
You can play up to 20 tracks on a CD in order.
1 Insert a CD and wait for it to be read.
2 Press PROGRAM/MEMO.
on the remote control
in stop status.
3 Press .bb / BB> on the unit
or
./>
on the remote control
to select a
track.
Audio CD and MP3/ WMA CD can be played back in this unit.
1. Open the CD door
2. Select the CD tray
3. Insert the CD: Label facing up.
4. Close the CD door
5. Select the CD function
The display will show the total
number of tracks (files).
6. Start the CD playing
7. To stop a CD playing
ON UNIT ON REMOTE
Z OPEN/ CLOSE
DISC SKIP
-
Z OPEN/ CLOSE
CD
BB
STOP
-
D.SKIP
-
-
FUNCTION
BB
/
[]
xx
4 Press PROGRAM/MEMO. again to save and select a next track.
5 Press
BB
on the unit
or
BB
/
[]
on the remote control to play the programmed
music files
.
6 To clear your selection, press STOP (or
xx
), PROGRAM/MEMO. and then
STOP (or
xx
).
About MP3/ WMA
MP3/WMA Disc compatibility with this unit is limited as follows:
• Sampling Frequency : 32 - 48 (MP3/ WMA)
• Bit rate : 32 - 320 kbps (MP3), 40 - 320 kbps (WMA)
• CD-R physical format should be “ISO 9660/JOLIET”
• If you record MP3/WMA files using the software which cannot create a FILE
SYSTEM, for example “Direct-CD” etc., it is impossible to playback MP3 files.
We recommend that you use “Easy-CD Creator”, which creates an ISO 9660
file system.
• Do not use special letters such as “/ : * ? “ < >”etc.
• Even if the total number of files on the disc has more than 1000, it will only be
shown up to 999.
Listening to music from your external device
The unit can be used to play the music from many types of external device.
1.Connect the external device to the
AUX IN connector of the unit.
> If your TV has only one output for
audio(MONO). connect it to the
left(white) audio jack on the unit.
2. Turn the power on.
3. Select the AUX function.
4. Turn on the external device and start it
playing.
11
/
]]
AUX
-
--
11
FUNCTION
-
ON UNIT ON REMOTE
Main unit
VCR, TV, ...
To Next Page
Loading...
Need help?
General
