8
Listening to the cassette tapes - More you can do
Playing Fast backward or Forward
Press .bb / BB>
(
. / > on the
remote control
)
on the unit during
playback, or stop, press
BB
at a point you want.
Dubbing
This function shows how to record from tape to tape
1 Press TAPE to select “TAPE-1”.
2 Insert the tape as follows.
TAPE1 - Insert a playback tape to dub.
TAPE2 - Insert a blank tape.
3 Press DUBB. “DUBBING” shows. Dubbing starts.
4 To stop dubbing, press STOP.
NOTE: In case you use the tape for the first time push the Z PUSH EJECT to
open the tape door and then remove the cushion in it.
Listening to the cassette tapes
Cassette tapes can be played back in this unit.
1. Open the tape door
2. Insert the tape
3. Close the tape door
4. Select the TAPE function
5. Start the tape playing
6. To stop a tape playing
ON UNIT
ON REMOTE
Z PUSH EJECT
-
Z PUSH EJECT
TAPE
BB
STOP
-
-
-
FUNCTION
BB
/
[]
xx
Listening to the radio - More you can do
Looking for radio stations automatically
1 Press and hold TUNING + / TUNING - on the unit or TUN- / TUN+ on the
remote control for more than 0.5 second.
2 The tuner will scan automatically and stop when it finds a radio station.
Deleting all the saved stations
1 Press and hold PROGRAM/MEMO. on the
remote control
for two seconds.
“ERASE ALL” shows.
2 Press PROGRAM/MEMO. on the
remote control
to erase all the saved sta-
tions.
Improving poor FM reception
Press
BB
/
[]
(MONO/ST) on the remote control.
Listening to the radio
Make sure both the FM and AM aerials are connected.
1. Select FM/AM
2. Select the radio station
3. To ‘save’ a radio station: A preset
number will show in the display.
4. Select the preset number
5. To confirm press: Up to 50 radio
stations can be saved.
6. To select a ‘saved’ station
ON UNIT
TUNER
TUNING (+)/ (-)
-
PRESET(-)/ (+)
-
PRESET(-)/ (+)
ON REMOTE
FUNCTION
TUN- / TUN+
PROGRAM/MEMO.
FOLDER • PRESET
PROGRAM/MEMO.
FOLDER • PRESET
To Next Page
Loading...
Need help?
General
