Recording to USB - More you can do
Recording Music file in disc source to USB
One track recording -
If the USB recording is started during playback of the CD, the one track/ file
would be recording into the USB.
All tracks recording -
If the recording button is pressed at the CD stop, all tracks/ files would be
recording.
Program list recording -
USB records after creating your own program if you want to record the track
you want. Up to 20 songs can be recorded.(Audio CD only)
To select recording bit rate and speed
1 Press REC./ PAUSE (USB) on the player or
zz
REC on the remote control
for longer than 3 seconds.
2 Use .bb / BB> on the player or . / > on the remote control to
select the bit rate.
3 Press REC./ PAUSE (USB) or
zz
REC again to select the recording speed.
4 Use .bb / BB> or . / > to select a desired recording speed.
X 1 SPEED (96kbps, 128kbps, 192kbps, 256kbps)
- You can listen to music while recording it. (Audio CD Only)
X 2 SPEED (96kbps, 128kbps)
- You can just recording the music file. (Audio CD Only)
5 Press REC./ PAUSE (USB) or
zz
REC to finish the setting.
Pausing recording
During recording, press REC./PAUSE(USB) or
zz
REC to pause recording.
Press REC./PAUSE(USB) or
zz
REC to continue recording. (Only Radio/ AUX)
When you are recording, look out for the following
• You can check the recording percentage rate for the USB record on the
screen during the recording. (MP3/ WMA CD only)
• During recording MP3/ WMA, there is no sound.
• When you stop recording during playback, the file that has been recorded at
that time will be stored.(Audio CD only)
• Do not remove the USB device or turn off the unit during USB recording. If
not, an incomplete file may be made and not deleted on PC.
• If USB recording does not work, the message like “NO USB”, “ERROR”,
“USB FULL” or “NO REC” is displayed on the display window.
• A file is recorded by 128Mbyte when you record for a long term.
• When you stop recording during playback, the file will not be stored.
• You may not record more than 999 files.
• It’ll be stored as follows.
11
Recording to USB
You can record a various sound source to USB.
1. Connect the USB device to the unit.
2. Select a mode in which you want to
record.
Play back a sound source first.
3. Press
The display changed in the following
order.
“USB REC” <-> “TAPE REC”
4. Press the button once more when
“USB REC” is displayed.
Recording starts.
5. To stop recording, press
ON UNIT ON REMOTE
-
(CD,TUNER, ...)
REC./ PAUSE
(USB)
REC./ PAUSE
(USB)
STOP
-
FUNCTION
z
REC
z
REC
xx
AUDIO CD
MP3/ WMA
The other sources
To Next Page
Loading...
Need help?
General
