LG MJ3281BC - Thai Auto Menu

17
HOW TO USE
Thai Auto Menu
The following example will show you how to cook 0.3 kg
of stir-fried seabass with onion.
1
Press
STOP/CLEAR.
2
Press
THAI AUTO MENU.
The following indication is displayed: “
”.
3
Turn
COOK MODE
until display shows
“2 STIR-FRIED SEABASS WITH ONION”.
Press
START/Q-START
for category confirmation.
• Thai auto menu are programmed.
• Thai auto menu allows you to cook most of your
favourite food by selecting the food type and the
weight of the food.
NOTE
Thai Auto Menu Guide
Category Instructions
1. Stir-fried Squid with Curry Powder
- Food Temp. : Refrigerated
- Utensil : Crisp tray
Ingredients
300 g squids \ 1/2 onion, sliced \ 2 red spur peppers, sliced
2 Chinese celeries, cut 2 inches \ 2 spring onions, cut 2 inches
2 tablespoons curry powder \ 2 tablespoons oyster sauce
3 tablespoons unsweetened condensed milk \ 1 egg
2 teaspoons sugar \ 2 tablespoons chili paste \ 2 tablespoons cooking oil
1.
Remove the head, tentacles and ink-sac from the squid. Pull o and discard
the mottled skin. Slice esh to stripe and cut into cubes, drain.
2. Mix all the ingredients except vegetables and oil.
3. In the crisp tray, put the mixture, vegetables, oil and squids.
4. Place the crisp tray in the oven.
5.
Choose the menu and press start.
6. When beep, turn food over.
7. And then press start to continue cooking. After cooking, serve
immediately.
4
Turn
COOK MODE
until display shows “0.3 kg”.
Press
START/Q-START.
When cooking you can increase or decrease cooking
time by turning
COOK MODE.