To Next PageTo Next Page
Need help?Do you have a question about the LG MULTI V ARNU093M1A4 and is the answer not in the manual?
General| Category | Air Conditioner |
|---|---|
| Type | Multi V |
| Model Number | ARNU093M1A4 |
| Cooling Capacity | 9, 000 BTU/h |
| Heating Capacity | 10, 000 BTU/h |
| Refrigerant | R410A |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Noise Level | 32-39 dB(A) |
| Outdoor Unit Noise Level | 54 dB(A) |
Provides critical safety precautions and warnings for the installation process of the unit.
Details safety precautions and requirements for electrical wiring installation.
Safety and best practices for wiring and separating power and communication cables.
Details on making proper power and communication cable terminations.
Specifies power requirements and wiring standards for indoor units.
Covers safety guidelines for operating the unit, including handling and maintenance procedures.
Emphasizes personnel safety as the primary concern during all installation procedures.
Provides warnings and notes on handling R410A refrigerant and piping system requirements.
Illustrates refrigerant piping connections for multiple ducted unit types.
Provides guidance on selecting an appropriate installation location for indoor units.
Step-by-step instructions for installing the indoor unit chassis.
Details pipe connection dimensions and refrigerant safety for ducted units.
Details procedures for roughing in ductwork and connections for the indoor unit.
Covers safety precautions and preparation steps for refrigerant piping.
Step-by-step guide on how to create proper flare fittings for refrigerant lines.
Overview of condensate drainage systems for ducted indoor units.
Steps for safely connecting power wiring to the indoor unit.
Details LGRED technology, HRU compatibility, and Gen 4 DIP switch configurations.
Explains how to configure DIP switches for group control and other functions.
Checklist items for the rough-in phase of installation.
Checklist items related to refrigerant piping installation.
Checklist items for the condensate system installation.
Checklist items for electrical connections and grounding.
Checklist items for the indoor unit control panel and DIP switches.
