Installation Manual 5
ENGLISH
Safety Precautions
Install the air conditioner according to this
Installation Manual.
- If the unit is installed improperly, water leakage,
electric shock, or fire may result.
Have all electric work done by a licensed
electrician according to "Electric Facility
Engineering Standard" and "Interior Wire
Regulations" and the instructions given in
this manual and always use a special circuit.
- If the power source
capacity is inadequate or
electric work is per-
formed improperly, elec-
tric shock and fire may
result.
Securely install the cover of control box and
the panel.
- If the cover and panel are not installed properly,
dust or water may enter the outdoor unit and fire
or electric shock may result.
When installing and moving the air condition-
er to another site, do not charge it with a
refrigerant different from the refrigerant
(R407C) specified on the unit.
- If a different refrigerant or air is mixed with the
original refrigerant, the refrigerant cycle may
malfunction and the unit may be damaged.
If the air conditioner is installed in a small
room, measures must be taken to prevent the
refrigerant concentration from exceeding the
safety limit when the refrigerant leaks.
- Consult the dealer regarding the appropriate
measures to prevent the safety limit from being
exceeded. Should the refrigerant leak and cause
the safety limit to be exceeded, hazards due to
lack of oxygen in the room could result.
When moving and reinstalling the air condi-
tioner, consult the dealer or an authorized
technician.
- If the air conditioner is installed improperly, water
leakage, electric shock, or fire may result.
To Next Page
Loading...
Need help?
General
