Troubleshooting Guide
- 86 -
Copyright ©2013 LG Electronics. Inc. All right reserved.
Only for training and service purposes
LGE Internal Use Only
09
1. Error developed in communication between the
micro- processor and the EEPROM on the sur-
face of the PCB.
2. ERROR due to the EEPROM damage
Error
No.
Error Type Error Point Main Reasons
Error occur in EEPROM
of the Indoor PCB
Indoor unit EEPROM
error
n Error diagnosis and countermeasure flow chart
- Replace the indoor unit PCB, and then make sure to perform Auto addressing and input the address of central control
To Next Page
Loading...
Need help?
General
