EasyManuals Logo
Home>LG>Heat Pump>Multi V mini

LG Multi V mini User Manual

LG Multi V mini
97 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #6 background imageLoading...
Page #6 background image
8
|
INTRODUCTION
Introduction
Due to our policy of continuous product innovation, some specifications may change without notification.
© LG Electronics U.S.A., Inc., Englewood Cliffs, NJ. All rights reserved. “LG” is a registered trademark of LG Corp.
Bene ts of the
Multi V Mini
Maximum individual occupant control
Longest refrigerant piping lengths
Highest elevation differences
• Maximum exibility
Quiet and comfortable environment
Reduced or eliminated ductwork
Convergence of Technological Innovation with Flexibility and Style
Multi V Mini
Multi V Mini is among the industry’s best
with vertical rise and piping lengths, so
choosing the LG Multi V Mini variable
refrigerant flow system provides the
system designer with the most freedom
and flexibility while engineering the
refrigerant pipe system. Multi V Mini is
a two-pipe heat pump system available
in nominal capacities of 3.0, 4.0, and 4.4
tons. It is best suited for applications with
zones that require heating or cooling, such
as residences and small office buildings.
The Multi V Mini allows the designer to
accommodate up to 9 thermal zones, each
controlled from a separate
controller. Mini outdoor units are available
in 208–230V/60Hz/1Ph.
Adaptable and Flexible
Multi V outdoor units can be adapted to
a wide range of building types and sizes,
such as schools, hotels, hospitals, offices,
and residences. The light weight and
small footprint allows the system
components to be placed in the building
without expensive cranes, easily
fitting into most service elevators and set
in place with minimal requirements for
structural reinforcements. The system’s
modular design means Multi V can be
commissioned in stages so tenants can
move in as each floor or even each room
is completed.
Multi V technology allows you to pipe
farther by reaching areas of the
building that would require the
installation of a second system when
using traditional direct-expansion cooling
and heating equipment. Multi V
provides the designer with
uncompromised pipe system engineering
flexibility—the longest pipe runs and the
largest elevation differences. Whether
your building is a high-rise condominium,
a hotel, a sprawling school, an office
complex or high-end residence, the Multi
V family of products is best suited to reach
the farthest corners and elevations of the
building from a single outdoor
unit location.
Smaller Chases and Plenums
The LG Multi V system uses refrigerant
piping to move heat resulting in smaller
space requirements compared to water
piping or air ducts. This helps reduce
the overall construction and material cost
of your building and gives back leasable
space. Flexible and logical placement of
system components, shorter pipe lengths,
and fewer joints lowers installation costs.
ARCHITECTURAL APPEAL

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the LG Multi V mini and is the answer not in the manual?

LG Multi V mini Specifications

General IconGeneral
BrandLG
ModelMulti V mini
CategoryHeat Pump
LanguageEnglish

Related product manuals