LG MultiV Series User Manual

Owner’s & Installation Manual 19
ENGLISH
18 New Wide Wired Remote Controller
Function Code Master/Slave
Select Master/ Slave by pressing
button.
(00: Slave, 01 : Master)
3
Pressing and holding the button
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user setup
mode.
1
If pressing button repeatedly, it moves to
override master/slave selection menu as
pictured below.
2
Press button to save.
4
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
5
Installation Instructions
Installer Setting - Override Master/Slave Setting
Override master/slave selection function to prevent indoor units operate as cooling and heating mode
at same time.
Override slave set indoor units are operated flow master indoor unit’s mode.
Installation Instructions
Installer Setting - Remote Controller Master/Slave Setup
Function Code Master/Slave value
Select Master/ Slave by pressing
button.
(00: Slave, 01: Master)
3
Press button to save.
4
Pressing and holding the button
for 3 seconds enters the remote
controller setup mode. If it is not held
for 3 seconds, it enters the user
setup mode.
1
If pressing button repeatedly, it moves to
master/slave selection menu as pictured
below.
2
Pressing the button will exit the settings
mode. If is not pressed, the remote
controller will automatically exit setup mode
after 25 seconds with no input. If the set
button is not pressed, the changes will not
take effect.
5
It is a function for settings in group control, or 2-remote controller control.
Remote controller Function
Master
Indoor unit operates based on master remote controller at group control.
(Master is set when delivered from the warehouse.)
Slave
Setup all remote controllers except one master remote controller to slave at
group control
• When controlling in groups, basic operation settings, airflow strength weak/medium/strong,
lock setting of the remote controller, time settings, and other functions may be restricted.
 Refer to the 'group control' part for details
 Override master/slave selection function is possible to use only when it is connected to the
succeeding models of Multi-V 7 series.
• If it is set as Override Slave, icon
is displayed on LCD Display Window. (See Figure 1)
Figure 1.

LG MultiV Series Specifications

General

Brand	LG
Model	MultiV Series
Category	Remote Control
Language	English