Owner’s & Installation Manual 45
44 New Wide Wired Remote Controller
This function is to move the indoor filter up/down for cleaning filter.
Owner's Instructions
Function setting - Elevation Grill
Press the button until the
icons flashes.
1
Select ‘descent’ by using the
buttons, and press . The descent
icon will appear while the up/down grille
descends.
2
When the up/down grille descends to
the desired position, use the
buttons to select ‘stop’ and press the
button.
3
4
Pressing the button will exit
the settings mode. If is not
pressed, the remote controller
will automatically exit setup
mode after 25 seconds with no input.
If the set button is not pressed, the
changes will not take effect.
5
When filter cleaning is finished, fix the
filter to the up/down grille and use the
buttons to select ‘ascent’ and
press the button.
• Elevation grill function only operates in the indoor unit with the elevation grill.
This function is to clear the indicator of indoor filter cleaning.
Function setting - Filter Sign Clear
Press button repeatedly
until the is flashing.
1
When the is flashing, press
the to clear this display
2
Owner's Instructions
• More electric power. For this reason we recommend that you clean the filter when the cleaning
time is expired.
C Filter cleaning indication is automatically cancelled without the separate cancellation after certain
period of time.
To Next Page
Loading...
Need help?
General
