Getting Started
4
Getting Started
1
POWER: This unit operates on a mains supply of 100 - 240 V ~, 50/60 Hz.
Wiring: This unit is supplied with a BS 1363 approved main plug. When
replacing the fuse, always use of the same rating approved to BS 1362.
Never use this plug with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug supplied is not suitable
for the mains sockets in your home, then the plug should be removed
and a suitable type tted. Please refer to the wiring instructions below:
Warning: A mains plug removed from the mains lead of this unit must
be destroyed. A mains plug with bared wires is hazardous if inserted in a
mains socket. Do not connect either wire to the earth pin, marked with
the letter E or with the earth symbol
6
or coloured green or green and
yellow. If any other plug is tted, use same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in accordance with
the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours of the wires in the
mains lead of this unit may not correspond with the coloured marking
identifying the terminals in your plug, proceed as follows: The wire which
is coloured blue must be connected to the terminal which is marked with
the letter N or coloured black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter L or coloured
red.