LG NB3740 - Mounting the Main Unit

12 Getting Started
U_
2. When you mount it on a wall (concrete), use
the wall plugs (Not supplied).You should drill
some holes. A guide sheet (Wall Mount Bracket
Installation Template) is supplied to drill. Use the
sheet to check the point to drill.
i.-@Note
}
Screws and Wall Plugs are not supplied for
mounting the unit.We recommend the Hilti
3. Remove theWall Mount Bracket Installation
Template.
4. Fix it with screws (not supplied) as shown in the
illustration below.
5. Hang the main unit onto the bracket as shown
below.
.- _._ Caution
• Do not instaJJ this unit upside down. Etcan
damage the parts of this unit or be the
cause of personal injury.
• Do not hang onto the installed unit and
avoid any impact to the unit.
• Secure the unit firmly to the wall so that it
does not fall off. ffthe unit falls off, it may
result in an injury of a person or damage to
the product.
° When the unit is installed on a wall, please
make sure that a child does not pull any of
connecting cables, as it may cause it to fall.