18 Connecting
Broadband
service
1. Select [Connection Setting] option in the
[Settings] menu then )tess ENTER (®).
S LA.
Router
DLNA certified servers
Wired network setup
If:there is a DHCP server on the local area
network (LAN) via wired connection, this unit will
automatically be allocated an EPaddress. After
making the physical connection, a small number
of home networks may require the unit's network
setting to be adjusted. Adjust the [NETWORK]
setting as follow.
Preparation
Before setting the wired network, you need to
connect the broadband internet to your home
network.
2. Read the preparations for the network settings
and then press ENTER (®) while [Start] is
highlighted.
Network will automatically be connected to the
unit.
Advanced Sefting
Ifyou want to set the network settings manually,
use A/V to select [Advanced Setting] on the
[Network Setting] menu and pressENTER(®).
1. UseA/V to select [Wired] and press ENTER
(®).
To Next Page
Loading...
