LG NB3740 - Page 22

Sysfem Selling 23
Initial Setup
When you turn on the unit for the first time, the
initial setup wizard appears on the screen. Set the
display language and network settings on the initial
setup wizard.
1. Press (3 (Power).
The initial setup wizard appears on the screen.
2. Use A/V/</> to select a display language
and press ENTER (®).
Read and prepare the preparations for the
network settings and then press ENTER (®)
while [Start] is highlighted.
If wired network is connected, the network
connection setting will automatically be
finished.
4. All available networks are displayed on the
screen. Use A/V to select [Wired Network]
or desired SSID of wireless network and press
ENTER (®).
Use A / V / < / > to select the IP mode
between [Dynamic] and [Static].
Normally, select [Dynamic] to allocate an IP
address automatically.
6. Select [Next] and pressENTER(®) to apply
network settings.
7.
8.
Network connection status is displayed on the
screen.
For details on network settings, refer to
"Connecting to your Home Network"on page
17.
Select [Next] and press ENTER (®).
You can listen toTV sound through HTSSpeaker
automatically when TV is turned on. TV and HTS
should be connected with optical cable. Press
A to move and press </> to select [On] or
[Off]. Select [Next] and press ENTER (_)).
(It
3
th
} u_E_0A_
Efyou have security on your access point, you
need to input the security code as necessary.