LG NB3740 - Remote Control and Wireless Connectivity

O
46 Operating
@
Listening to music stored on
the Bluetooth devices
Pairing your unitand Bluetooth
device
Be[fore you start the pairing procedure, make
sure the Bluetooth [feature is turned on in to your
Bluetooth device. Refer to your Bluetooth device's
user guide. Once a pairing operation is per[formed,
it does not need to be per[formed again.
1. Select the Bluetooth function by using the
FUNCTION (-_D).
Appears"BT READY"in display window.
2. Operate the Bluetooth device and per[form the
pairing operation.When searching [for this unit
with the Bluetooth device, a list of:the devices
[found may appear in the Bluetooth device
display depending on the type off Bluetooth
device.Your unit appears as"LG-HTS"
3. When this unit successfully paired with your
Bluetooth device, Bluetooth LED of:this unit
lights up and "BTPAERED"appears in the display
window.
@No,e
epending on the Bluetooth device type,
ome device have a different pairing way.
nter the PiN code (0000) as needed.
4. Listen to music.
To play a music stored on your Bluetooth device,
refer to your Bluetooth device's user guide.
.-. @ Note
• When using Bluetooth _technology, you
have to make a connection between the
unit and the Bluetooth device as close as
possible and keep the distance.
However it may not work well in the case
below :
- There is a obstacle between the unit and
the Bluetooth device.
- There is a device using same frequency
with Bluetooth_technology such as a
medical equipment, a microwave or a
wireless LAN device.
• You should connect your Bluetooth device
to this unit again when you restart it.
• When you select Bluetooth function again
after changing to other functions, Bluetooth
connection may be disconnected. You
should reconnect the bluetooth device to
use this function.
• The sound may be interrupted when
the connection interfered by the other
electronic wave.
• You cannot control the Bluetooth device
with this unit.
• Pairing is limited one Bluetooth device per
one unit and multi-pairing is not supported.
Depending on the type off the device,
you may not be able to use the Bluetooth
[function.
• You can enjoy wireless system using phone,
MP3, Notebook, etc..
• The more distance between the unit and
the Bluetooth device, the lower the sound
quality becomes.
Bluetooth connection will be disconnected
when the unit is turned off or the Bluetooth
device gets [far from the unit.
• When Bluetooth connection is
disconnected, connect the Bluetooth device
to the unit again.
• When not connected the Bluetooth,"BT
READY"appears on the display window.