LG OLED55GX - Tools for Installation

ENGLISH_index
14
• Install the product only on a vertical wall.
Do not install on a tilted wall that exceeds
building standards or on the heavily titled
wall or ceiling.
LG is not responsible for problems caused by
improper installation of the product, e.g.,
heavily tilted walls and ceilings.
• Check the enclosed accessories before
installation. We are not responsible for any
lost or damaged accessories after the inner
packaging is opened.
• When an infant or small child swallows
the enclosed accessories, various safety
accidents such as choking may occur. Keep
the enclosed accessories out of the reach of
infants and children.
• When tightening screws, tighten until fully
snug.
Avoid using excessive force when tightening
the screws. Doing so may damage the
wall and product or reduce the rigidity or
performance of the product.
• Avoid installing a TV that exceeds the
specied tensile load, and do not allow any
external force to be applied to the product.
• Avoid accidents by using work tools with
care during installation.
Tools for Installation
• “+” shaped screwdriver (manual or electric)
/ 8mm wrench / level / drill / Ø 8mm drill
bit for concrete or Ø 4mm drill bit for steel
Securing TV to the Wall
(Except for OLW480B)
• Please use the TV close to the wall after
installation.