14
ADVANCED FUNCTIONS
ENGLISH
Auto Changeover operation
This mode changes the operation mode auto-
matically to maintain the set temperature
at ±2°C.
1 Press | to turn on the power.
2 Press f repeatedly to select the auto
changeover operation.
-
C is displayed on the display screen.
3 PressG or Hto set the desired tempera-
ture.
- The temperature range is 18°C (64°F) ~
30°C (86°F).
4 Press g repeatedly to select the fan
speed.
NOTE
!
This function may not be supported,
depending on the model.
Cooling-only models
Auto operation
(Artificial intelligence)
In this mode, the fan speed and the tempera-
ture adjust automatically, based on the room
temperature.
1 Press | to turn on the power.
2 Press f repeatedly to select auto opera-
tion.
3 PressG or Hto select the desired opera-
tion code if the temperature is higher or
lower than the desired temperature.
Plasmaster Purification oper-
ation (optional)
Ion particles from Plasmaster Ionizer devel-
oped by LG sterilize the aerial bacteria and
other harmful substances.
1 Press | to turn on the power.
2 Press A.
-
K is displayed on the display screen.
NOTE
!
• You can use this function by pressing
A
without turning the air conditioner
on.
• This function may not be supported, de-
pending on the model.
• Do not touch Plasmaster ionizer during
operation.
NOTE
!
• In this mode, you cannot adjust the fan
speed, but you can set the air deflector
to rotate automatically.
• This function may not be supported, de-
pending on the model.
To Next Page
Loading...
