LG PA1000T - My Media; Connecting and Removing USB Devices

31
MY MEDIA
MY MEDIA
Before Using
Connecting a USB Device
Connect a USB device (external HDD,
USB memory) to the USB port of
projector to enjoy the content les stored
in the USB device with your projector.
You cannot write or delete data in the
USB device. Connect a USB ash drive
as shown below.
USB Flash Drive
Removing a USB Device
1
Click the Q.MENU button.
2
Use the or button to move
to USB Device and press the OK
button.
3
Select a USB to remove. Wait for
conrmation that the USB device
has stopped before removing the
USB.
NOTE
y
If detached early, an error may
occur on the projector or the USB
storage device.
y
Once a USB device has been
selected for removal, it can no longer
be read. Remove the USB storage
device and then re-connect it.