22
USING THE PROJECTOR
USING THE
PROJECTOR
Connecting the
Antenna or Cable
To watch TV using an indoor/outdoor
antenna, connect a wall terminal and the
ANTENNA IN port of the projector using
an RF cable (75 Ω).
You can watch public TV or cable
(analog, digital) TV.
(The RF cable is sold separately.)
NOTE
y
Ensure you use a standard coaxial
cable (75 Ω, sold separately) when
connecting to the projector input.
y
For better image quality in
locations where signal strength is
low, purchase and install a signal
amplifier (booster).
y
A signal splitter is required if you
want to use two or more projectors
through one antenna.
y
If you have any problems when
installing the antenna, please consult
a suitable retailer or the store where
you purchased the antenna.
To Next Page
Loading...
