5
SAFETY INSTRUCTIONS
EN
• If the cord/plug is damaged, have it replaced by an authorized service
person using authorized replacement parts.
use of long-sleeved gloves and safety glasses.
be sharp.
• Use a dedicated circuit.
• Do not disassemble or modify the product.
• Adhere to all industry recommended safety procedures including the
• Use care when unpacking and installing. The edges of the product may
• Disconnect the power cord or circuit breaker before installing or
• Keep packaging materials out of the reach of children. These materials
servicing the appliance.
can pose a suffocation risk to children.
temperatures below freezing or exposed to outdoor weather conditions.
the vicinity of this or any other appliance.
refrigerant.
• Store and install the product where it will not be exposed to
• Do not store or use gasoline or other flammable vapors and liquids in
• Do not input air or gas into the system except with the specific
• Use non-flammable gas (nitrogen) to check for leak and to pur
vibration or water leakage. It may cause injury or an accident.
• Keep level parallel in installing the product. Otherwise, it may cause
• Do not install the unit in potentially explosive atmospheres.
ge air;
using compressed air or flammable gas may cause fire or explos
• Compliance with national gas regulations shall be observed.
• When flared joints are reused indoors, the flare part shall be
renewed.
re-fabricated.
• Mechanical connections (mechanical connectors or flared joints) shall be
accessible for maintenance purposes.
• When mechanical connectors are reused indoors, sealing parts shall be
ion.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
