WIRING DIAGRAM
9
ENGLISH
CAUTION
!
• In order to use the main module's shutdown, heating/cooling, and fire detection functions,
the main module's +12V terminal should be connected to the DCOM terminal. Failure to
do so could result in the malfunctioning of the product.
• In order to use the UI module's emergency shutdown and differential pressure switch
functions, the UI module's +12V terminal should be connected to the DCOM terminal.
Failure to do so could result in the malfunctioning of the product.
WIRING DIAGRAM
• PAHCNM000
To Next Page
Loading...
