Operating 13
Operating
2
Voice Command
You can speak to operate the voice command of your
smartphone through speaker’s microphone by using
the voice command app or the Siri.
Make sure use the smart device that has voice
command.
,
Note
2 seconds
1. Connect the speaker to smart device through
Bluetooth.
2. Press and hold the
N
button 2 seconds to active
voice command of your smart device.
3. Activate voice command app as follow.
- Android O/S : Select the voice command app.
- iOS O/S : Siri activates automatically.
4. Make a request to voice command app or Siri
through microphone of speaker.
y
During Handsfree Function, Voice Command
is not supported.
y
When voice command time limit exceeded
on smart devices, this function automatically
cancel.
y
It is recommended that you use the Google
app (Google Assistant, Google Now etc.)
when enjoying this function by using Android
device. Google app is provided by Google.
Some of location may not support by Google
Policy.
y
If you want to cancel Voice command mode,
press and hold the
N
button 2 seconds again
when this function is activating.
y
For more information, refer to voice command
app or Siri.
y
Speaking at near microphone will increase the
success rate.
y
It may not work depending on the Bluetooth
device.
,
Note
To Next Page
Loading...
Need help?
General
