Operating 23
Operating
2
Dual Mode Connection
You can enjoy the sound in stereo by using two
speakers. For enjoying Dual Mode, you need to
purchase another speaker.
1. Press the each speaker’s
3
DUAL button. Then
the speakers are ready to Dual Mode.
- Beep sound will be heard.
2. If two speakers are connected, Bluetooth LED of
the Main speaker turns on and Bluetooth LED
of the Other speaker turns off. First hear beep
sound at main speaker, and then at other speaker.
- speaker : Main speaker is to set L (Left)
channel and turns on Bluetooth LED.
-
speaker : Other speaker is set to R (Right)
channel and turns off Bluetooth LED.
y
It takes up to 1 minute to connect to Dual
Mode.
y
Using Dual Mode is limited to only PL2
Model and is unavailable on other Portable
Bluetooth Speaker.
y
If you are not connected to Bluetooth device,
main speaker's Bluetooth LED blinks.
y
The
speaker depends on MAC address of
Bluetooth.
,
Note
3. Play the desired music on the Bluetooth device.
To Next Page
Loading...
Need help?
General
