Operating14
Operating
2
Handsfree Function
You can receive incoming call on your Bluetooth
device to this unit. Connect the unit to a Bluetooth
device.
Function How to
Receive a call. Press
N
.
End the call.
Press
N
.
Reject a call.
Press and hold
N
for 2 seconds
Toggle between speaker and
your phone during a call.
Press and hold
N
for 2 seconds
y
During Handsfree Function, Voice Command
is not supported.
y
Only smartphone is available to use this
function.
y
To adjust the call volume, press
P
,
O
buttons on the unit.
y
In Dual Mode and Multi Mode, you can receive
a call on only main speaker due to audio
howling. (Page 26-29)
y
On some Bluetooth devices, when an
incoming call is received, it might ring the
built-in ringtone, (ex. iOS devices) The Built-in
ringtone is not adjustable.
y
In multi phone pairing mode, you can only
receive the call of one of the connected
devices on the speaker.
y
If a call is connected between multi paired
Bluetooth device, hands free does not work
correctly.
y
Even if you switch to AUX mode while in
Bluetooth connection status, you can still
use this function.
y
To use this mode, some Bluetooth devices
will need to be changed to speaker mode
when a call is received. (ex. iOS devices)
y
If you receive a call by using the talk button
on your phone, the call will be connected to
your phone. (Only iOS devices)
y
If you do not want to use this function,
disable the Bluetooth setting on your phone.
Connect Bluetooth again to use this mode.
,
Note
To Next Page
Loading...
Need help?
General
