LG PQRCVCL0Q Engineering Product Data Book

2.1 Product Feature
TM
HVAC Solution
2 _ Wired remote controller
Wired remote controller
2.1.2 List of function
Category Level1 Level2 Level3 DESCRIPTION
Basic
function
Temp setting Single set(1 set) - -
Operation mode
cooling - Cool the room to the desired temperature.
Dehumidification - It removes the moisture with cooling.
Monsoon dehumidification
*Only for India
- It is a special function only for India
Heating - heats the room the desired temperature.
Fan - Fan only operation, no cooling or heating.
AI or Auto changeover
(single set point)
AI for C/O
Auto Changeover
for H/P
The product automatically provides the appropriate fan speed based on the
temperature of the room
Power cooling - It provides strong cooling in short time.
Power heating - It increases indoor temperature quickly.
Himalaya cooling
*Only for India
-
Himalayan cooling is a combined function of power cooling + vane swing, which
is a region-specific feature applied to India wall mount models.
It is a special function only for India
Display indoor temp. - - It display indoor temperature.
Fan Speed
Slow -
It is a function to set the Fan speed of the indoor unit.
Low -
Medium -
High -
Super high -
Auto -
Wind direction
Up-down swing -
It is a function to set the wind direction of the indoor unit.Left-right swing -
Comfort wind(Swirl) -
Indirect wind -
It operate at the minimum angle.
Provides air flow that blows away from user for comfort.
Direct wind -
It operate at the maximum angle.
It is suitable for high ceiling.
Smart mode - Smartly keeps set temperature by adjusting the wind direction automatically.
Refresh mode -
Adjust the temperature of the direct and indirect wind to create a comfortable
and efficiency working environment.
Sub
function
Air Purify - - It makes the indoor air clean and pleasant.
Energy saving cooling - -
This is a function that improves the user's comfort and power saving performance
by raising the desired temperature after an appropriate time elapses after the
indoor temperature reaches the desired temperature during cooling operation.
Robot cleaning
(manual)
- -
Robot cleaning function is the function to automatically perform the filter clean-
ing with the cleaner in the product when the air conditioner is used for certain
period of time.
Electric Heater - -
It is the function to reinforce the heating capability by turning on the electric
heater during the heating operation.
Humidification - -
It is the function to activate the humidifier installed in the product when the
indoor air is dry.
Fan auto - -
It is a function to operate indoor fan only when comp ON.
This is to prevent noise caused by changing the control air volume when switch-
ing the compressor On/Off.
Comfort cooling
*ODU Function
- -
The comfort cooling is the function to automatically control the cooling strength
to maintain the pleasant feeling without turning off the product after the indoor
temperature reached the desired temperature.
(If ODU set continuous cooling functions, can use this function)
Ventilation kit - - You can turn on and off the ventilation kit installed in the product.
Mosquito away *Only for India -
This function activates / stops the mosquito chase function.
It is a special function only for India

LG PQRCVCL0Q Specifications

General

Brand	LG
Model	PQRCVCL0Q
Category	Remote Control
Language	English