To Next PageTo Next Page
Need help?Do you have a question about the LG PREMTW101 and is the answer not in the manual?
General| Brand | LG |
|---|---|
| Model | PREMTW101 |
| Category | Remote Control |
| Language | English |
Guidelines for safe installation procedures and requirements.
Guidelines for safe product usage and precautions.
Details about the remote controller's components and functions.
Explanation of the remote controller's main display screen.
How to navigate and use the menu screen.
How to adjust various settings on the remote controller.
How to view system status and operational data.
Messages displayed for operations, errors, or confirmations.
How the remote controller returns to the main display.
How to turn the air conditioner on and off using the remote.
How to select different operating modes like Cool, Heat, AI/Auto.
Specific settings and considerations for cooling mode.
Specific settings and considerations for heating mode.
How the unit automatically adjusts settings for comfort and efficiency.
How to set and adjust the target temperature for various modes.
How to operate the Domestic Hot Water (DHW) heating function.
How to quickly heat the DHW tank.
How to check current temperatures for different sensors.
How to set target temperatures for individual zones.
Steps to access and configure the lock settings.
How to lock various functions of the remote controller.
How to access and set various timer functions.
How to set a simple on/off timer for a few hours.
How to schedule the unit to turn on at a specific time.
How to schedule the unit to turn off at a specific time.
Steps to access and configure schedule settings.
How to check and manage daily timer schedules.
How to view, edit, add, or delete saved schedules.
Step-by-step guide to adding a new schedule.
How to set specific days to override or disable schedules.
Displays real-time power consumption data.
Shows historical power and calorie usage data.
Settings related to energy monitoring and alerts.
Steps to access and configure various function settings.
How to set the start and end times for low noise operation.
How to connect the unit to a wireless network.
How to set target water temperatures for heating/cooling.
How to configure control for third-party boilers.
Steps to access and configure user-specific settings.
How to change the display language of the remote controller.
How to set the temperature display unit (Celsius/Fahrenheit).
How to adjust the screen timeout settings.
How to adjust the screen brightness when idle.
How to set the current date displayed on the remote controller.
How to set the current time displayed on the remote controller.
How to configure daylight saving time settings.
How to set a password to protect settings.
How to reset all timer and schedule data.
How to change the screen theme (e.g., color).
How to restart the remote controller.
Steps to access and configure service-related settings.
How to input or view service center contact information.
Displays product and capacity information of the connected unit.
Displays the remote controller's software version.
Information about open source software licenses used.
Detailed steps for physically installing the remote controller.
How to connect multiple indoor units to one remote controller.
Steps to access the installer configuration menu.
How to perform a test run of the unit for diagnosis.
Settings for the compressor's 3-minute delay function.
How to select the temperature sensor source for operation.
How to configure the dry contact input for external control.
How to set the address for central control systems.
How to set master/slave configuration for multiple controllers.
How to test the water pump operation.
Setting the temperature range for air cooling mode.
Setting the temperature range for water cooling mode.
Setting the temperature range for air heating mode.
Setting the temperature range for water heating mode.
Setting the target temperature for Domestic Hot Water (DHW).
How to lock operation modes for specific seasons.
Controls floor heating temperature for cement curing.
Setting the temperature for electric heater activation.
Setting temperature to prevent condensation during cooling.
Setting outdoor temp. limits for auto mode.
Setting indoor temp. limits for auto mode.
Setting leaving water temperature limits for auto mode.
Settings for tank disinfection cycles to kill bacteria.
Configuration for tank settings related to temperature control.
Further configuration for tank settings, including hysteresis.
Setting priority for electric heater and DHW tank heater operation.
Setting operation times for DHW tank heating.
Setting for using the heating tank heater function.
Setting the water flow rate for the pump.
Adjusting heating air temp. for thermal On/Off control.
Adjusting heating water temp. for thermal On/Off control.
Adjusting cooling air temp. for thermal On/Off control.
Adjusting cooling water temp. for thermal On/Off control.
Setting reference temperature for leaving water control in heating.
Setting reference temperature for leaving water control in cooling.
Setting pump operation and delay options in heating mode.
Setting pump operation and delay options in cooling mode.
Settings for forced operation to prevent pump failure.
Setting the usage of the unit's CN_CC port for external control.
Setting the pump capacity application model.
Setting the pump RPM for BLDC pumps.
Enabling/disabling SG Ready function and setting reference values.
Setting operation reference values for Seasonal Auto mode.
Setting the address for Modbus devices.
Setting for the refrigerant leak sensor.
Checking the result of auto-addressing for indoor units.
Controlling external inputs/outputs via CN-EXT port.
Setting the outdoor unit's function as Master or Slave.
Setting the main agent for low noise mode control.
Setting anti-freeze temperature to prevent frostbite.
Setting up a second circuit for zone control.
Setting to control an external water pump.
Configuring control for third-party boilers.
Checking status of energy and power, collecting data.
Setting to display estimated power consumption data.
Functions to ensure flow before compressor and pump life.
Setting operation reference values for the solar thermal system.
Setting up zone environments and checking operating status.
Checking the current water flow rate.
Setting operation reference values for data logging.
Resetting the remote controller password to default.
