LG PREMTW101 - Modbus Address; Refrigerant Leak Sensor

109
INSTALLER SETTING
ENGLISH
108
INSTALLER SETTING
Modbus Address
It is function to set the address of the Modbus device that is externally linked to the product.
Modbus address setting function is available from indoor unit.
• In the installer setting list, select Modbus Address , and press [OK] button to move to the detail
screen.
OK
Refrigerant Leak Sensor
The installation of the flare coupling part and the welding part leakage sensor of the indoor unit is
set.
• Change setting values using [<,>(left/right)] button.
Value
Installed
Not Installed
NOTE
To use this function, switch No.1 of option switch 1 must be turned ON.