97
INSTALLER SETTING
ENGLISH
TH on/off Variable, cooling water
It is a function to adjust the cooling water temperature Thermal On / Off temperature according
to the field environment in preparation for cooling or cooling claim.
• You can set the following setting values using [<,>(left/right)] button.
Value
Description
TH On TH Off
Type0 0.5 °C -0.5 °C
Type1 1 °C -1 °C
Type2 2 °C -2 °C
Type3 3 °C -3 °C
96
INSTALLER SETTING
Heating temp. setting
• At the leaving water control in heating mode, the control reference water temperature position
setting
- If the air / leaving water temperature selection setting is set to leaving water temperature
• Change setting values using [<,>(left/right)] button
Value
Outlet (Default) Inlet
To Next Page
Loading...
