75
INSTALLER SETTING
ENGLISH
DHW set temp
Determine heating setting temperature range when DHW temperature is selected as setting
temperature
• In the installer setting list, select DHW set temp. category, and press [OK] button to move to
the detail screen.
OK
Cooling / Heating only mode
Set the Operation mode lock when Multi V Indoor unit is used only cooling mode in summer and
Hydro Kit is used only heating in winter.
OK
Value1 Value2 (Oil Recovery)
Release -
Set
Type 0
Type 1
74
INSTALLER SETTING
NOTE
The setting range differs depending on the connected product.
To Next Page
