LG PREMTW101 - Date

85
INSTALLER SETTING
ENGLISH
84
INSTALLER SETTING
LWT for auto mode
It is a function to set the heating flow Min/Max temperature for auto mode.
OK
Tank disinfection setting 1, 2
• Disinfection operation is special DHW tank operation mode to kill and to prevent growth of
viruses inside the tank.
- Disinfection active : Selecting enable or disable of disinfection operation.
- Start date : Determining the date when the disinfection mode is running.
- Start time : Determining the time when the disinfection mode is running.
- Max temp. : Target temperature of disinfection mode.
- Duration time : Duration of disinfection mode.
Time
Start time
Max temp
Duration time
Water temperature
(Inside DHW)
Temperature profile
of Disinfection operation
OK
OK
NOTE
The setting range differs depending on the connected product.
NOTE
DHW heating should be enable
• If Disinfection active is set as ’ Not use’, that is ‘disable disinfection mode’, Start date and
Start time is not used.