93
INSTALLER SETTING
ENGLISH
92
INSTALLER SETTING
Pump frequency setting (LPM)
It is a function to set for water flow rate in water piping.
OK
Range
15 ~ 92 LPM
TH on/off Variable, heating air
It is a function to adjust the heating air temperature Thermal On / Off temperature according to
the field environment in preparation for heating or heating claim.
• You can set the following setting values using [<,>(left/right)] button.
Value
Description
TH On TH Off
Type0 -0.5 °C 1.5 °C
Type1 -1 °C 2 °C
Type2 -2 °C 3 °C
Type3 -3 °C 4 °C
To Next Page
Loading...
